High Performance Coatings


Always looking for that extra special performance edge over the others? Bonehead Performance offers three special high temperature ceramic coatings consisting of Thermal Barrier coating, Dry Film Lubricant coating and Heat Dissipation coating, all with Cerakote™.

High performance ceramic coated pistons
High performance ceramic coated pistons
Examples uses with drag racing
Examples uses with drag racing. Click image to enlarge.

Thermal Barriers

Thermal Barrier products significantly reduce heat transfer of components that operate at elevated temperatures. These coatings are used extensively in the automotive, commercial truck, heavy equipment and performance racing industries. Thermal barrier products increase performance, reduce maintenance cost and protect against corrosion. Thermal Barrier products can alter heat transfer by up to 15% depending on the specific application.

Cylinder head coated chambers. Click image to enlarge.
Cylinder head coated chambers. Click image to enlarge.
Thermal barrier coated piston top. Click image to enlarge.
Thermal barrier coated piston top. Click image to enlarge.

Recommended Uses:

  • Piston Domes
  • Combustion Chambers
  • Valve Faces
  • Exhaust Systems and Components

Dry Film Lubricants

Dry film lubricants using Micro Slick formulation coatings are designed to create a permanent lubricated surface to impede galling and the seizing of components. Like or dissimilar materials can benefit from the application of these materials. The suggested application processes allow the coating to become an intrinsic part of the component rather than a coating on the surface.

Dry film lubricant coated ring gear.
Dry film lubricant coated ring gear.
Dry film lubricant coated piston skirts w/ thermal barrier tops.
Dry film lubricant coated piston skirts w/ thermal barrier tops.
Dry film lubricant coated rocker arm. Click image to enlarge.
Dry film lubricant coated rocker arm. Click image to enlarge.

Recommended Uses:

  • Piston Skirts
  • Cylinder Walls
  • Crankshafts & Camshafts
  • Bearings and Gears
  • Valve Stems & Rocket Pivots

Micro Slick’s formulation prevents surface-to-surface contact, thus reducing friction and wear between mating surfaces. The exceptional low resistant to shear enables the Micro Slick coated surface to operate with extremely low friction.

Heat Dissipation Coatings

When applied to surfaces, Micro Dyne’s heat dissipation coatings transfer heat away from a substrate, resulting in improved efficiencies, performance and longevity of the coated parts. This ceramic bonded, thermal-conductive coating also helps to prevent corrosion and damage related to chemical and solvent attack. The Micro Dyne Artic Black and Transfer Grey coating systems are used extensively in the transportation and electronics industries to reduce residual heat from components.

Heat dissipation coated brake drums. Click image to enlarge.
Heat dissipation coated brake drums. Click image to enlarge.
Heat dissipation coated intercooler. Click image to enlarge.
Heat dissipation coated intercooler. Click image to enlarge.
Heat dissipation coated radiator. Click image to enlarge.
Heat dissipation coated radiator. Click image to enlarge.

Recommended Uses:

  • Radiators
  • Brake Drums
  • Oil Coolers
  • Differentials
  • Transmission Cases
  • Lighting Equipment
  • Heat Exchangers
  • Transmission Coolers
  • Air Conditioning Condensers

About Transfer Grey: C-187

Transfer Grey is formulated to provide an increased thermal transfer from a surface to a free flowing air environment. When applied to metal substrates, this coating is proven to increase thermal transfer of up to 35-40% versus uncoated metal substrates. This increased thermal transfer results in components operating at lower temperatures, thus creating gains in efficiency, and extending part life.

About Artic Black: P-202

Artic Black is a heat dissipation solid film lubricant. It is a resin bonded thermal conductive coating applied to metal surfaces; designed to protect, lubricate, and radiate heat. Arctic Black is formulated to protect metal form corrosion, provide maximum chemical and solvent resistance, and act as a high temperature solid film lubricant. Artic Black has shown to increase heat transfer by 10 – 15% when compared to uncoated metal substrates.

Click image to enlarge.
Heat dissipation coated with Artic Black. Click image to enlarge.

Between the two, Artic Black has a darker black finish. The Transfer Grey is more of a dark gray finish if your looking for more of the color to make up your mind.

Powder Coating Specialists for Commercial, Industrial, Home Decor, Furniture, Automotive, Motorcycles and Much More!