Automotive Powder Coating Prices

All prices include masking all threads, stripping, cleaning, degreasing, and coating parts.

There is a 50% additional charge for colors such as clear coats and translucent/anodized/candy colors due to being a 2-step coating process. These colors all have a * next to it on the color chart. Please give us a call or email us if you are unsure.

* Requires use of High Temp coating such as our Ceramic Coating that withstands up to 2000 degrees.

All prices are estimates only and pricing will depend on the amount of prep work involved.
Cast aluminum and magnesium parts may experience out-gassing and or bubbling in the finished powder coating. Bonehead Performance will take every precaution to avoid out-gassing, however Bonehead Performance cannot be held responsible for bubbling caused by porous coatings.

Each piece must be disassembled or additional charges will apply.

If you do not see a part listed that you would like to have powder coated, contact us.

All prices below are estimates only. Prices are subject to change upon inspection. The price minimum for any job is $50.

Part DescriptionPrice starting at:
A-Arm$40.00-$60.00 each (depending on size)
Air Intake Piping$2.00 per inch
Air Cleaner Base$40.00-$60.00
Air Cleaner Lid$30.00-$40.00
Battery Box$40.00-$50.00
Battery Tray$25.00-$35.00
Bead Lock Rings$20.00-$25.00 Each
Bell Housing$80.00-$100.00
Bolt Head (taped threads)$2.50 Each
BracketsSmall $15.00
Medium $20.00
Large $25.00
Brake Caliper (single pc.)$45.00-$65.00 each (depending on the number of pistons)
Brake Caliper (2 pc.)$65.00-$75.00 each (depending on the number of pistons)
Brake Caliper Bracket$20.00 each
Brake Backing Plate$30.00-$35.00 each
Brake Drum$50.00-$60.00 each
Bumpers$250.00-$300.00 (large off-road bumpers are $300+)
Carburetor$75.00-$125.00
Coil Spring$45.00-$65.00 Each (lifted suspension coil springs start at $70 each)
Control Arm$40.00-$60.00 each
Crossmember$50.00-$75.00
Differential Cover$30.00-$40.00
Drive Shaft$80.00-$100.00 (u-joints must be removed)
*Exhaust ManifoldPlease See Ceramic Coating Section
Fan$40.00-$45.00
Fan shroud$75.00-$100.00
Frame (full car frame up to 15')$1200.00-$1400.00
Fuel Tank$175.00-$200.00
Fuel Cell$75.00-$125.00 (depending on size)
Fuel Rail$30.00-$40.00
*HeadersPlease See Ceramic Coating Section
Headlight Buckets$35.00-$45.00 Per Pair
Headlight Ring$25.00-$35.00 Per Pair
*Heat Shield- CeramicPlease See Ceramic Coating Section
HitchFull Size Trailer Hitch- $150.00-$200.00
Hood Hinges$40.00-$60.00 Each
Hood Latch- Bottom$30.00-$40.00
Hood Latch- Top$20.00-$30.00
Hub Cap (metal)$30.00-$40.00 Each
Hubs$50.00-$60.00 Each
Inner Fenders / Wheel Wells$100.00-$140.00 Each
Intake Manifold4 - 6 - 8 Cylinder $140.00 - $160.00
Intercooler (our heat transfer coating works better at dissipating heat)$100.00-200.00 (depending on size & thickness- Side Mount or Front Mount)
Intercooler Piping$2 per inch
Leaf Springs (must be disassembled)Less than 24" Long- $40.00-$50.00 each

More than 24" Long- $50.00-$60.00 each
License Plate Frame$25.00-$35.00
Lug Nuts$2.50 Each
*o2 housing in CeramicPlease See Ceramic Coating Section
Oil pan$85.00-$125.00 (depending on size)
PlowBlade Only- $350.00-$450.00

Complete Assembly- $500.00-$600.00
PulleyUnder 4" Diameter $25.00
Over 4" Diameter $30.00
Radiator Support$160.00-$180.00
Rear HousingFull Size $250.00-$300.00
Narrowed $200.00-$255.00 (Pricing depends on how clean interior is of gear oil)
Roll Bar / Cage$100.00-$300.00 (Many styles available)
Running Boards$125.00-$175.00 Each
Snow Plow (must be disassembled)Blade Only- $350.00-$450.00

Complete Assembly- $500.00-$600.00
Subframe$100.00-$200.00 (import style)
$400.00-$600.00 (domestic classic car style)
Springs$45.00-$65.00 Each (lifted suspension coil springs start at $70 each)
Strut bar upper (only middle section if ends come off)$40.00-$50.00
Strut bar upper (ends included as 1 full bar)$75.00-$85.00
Strut bar lower (only middle section if ends come off)$40.00-$50.00
Strut bar lower (ends included as 1 full bar)$50.00-$60.00
Strut bar ends$25.00 each
Sway bar$75.00-$100.00
Timing Cover$40.00-$80.00 (depending on size)
Tow Hooks$35.00-$45.00 each
Trailer HitchFull Size Trailer Hitch- $150.00-$200.00
Transmission Housing (Bare Case)$175.00-$200.00
Transmission Pan$50.00-$75.00
Turbo Compressor Housing-Inlet$50.00-$75.00 (depending on size)
*Turbo Turbine Housing- Outlet in CeramicPlease See Ceramic Coating Section
Valve Cover4 Cylinder $90.00
Inline 6 Cylinder $100.00
V-6 Cylinder $100.00-$125.00 pair
V-8 Cylinder $110.00-$135.00 pair
Polished Lettering Add $25.00-$45.00.
Washer$1.50 Each
Water Neck$15.00-$20.00
Water Pump (must remove bearings inside)$50.00- $60.00
Wheelie Bars$100.00-$150.00
Windshield Wiper Arms$40.00 Pair
Curb Rash Repair on Wheels$60 per hour
Wheels
Add an anti-corrosive primer treatment as a basecoat for $25 per wheel.
Add a clear or candy topcoat for extra protection for $25 per wheel.
NOTE: Curb rash repair on wheels: $60/hr.
***NOTE: We will no longer be servicing chrome plated wheels.***

NOTE: We do not have the capability to remove tires from wheels or store vehicles at our facility. We would certainly be happy to recommend a shop that can handle this service for you because we work very closely with them on a weekly basis. Give us a call for more information.
Call for larger sizes

24" to 26" $175.00 Each
22" to 23" $145.00 Each
20" to 21" $135.00 Each
18" to 19" $125.00 Each
16" to 17" $115.00 Each
14" to 15" $105.00 Each
13" and Smaller $50-$75
NOTE: There is a $50 minimum per order & $25 minimum per color change.

Powder Coating Specialists for Commercial, Industrial, Home Decor, Furniture, Automotive, Motorcycles and Much More!