ATV and Motorcycle Powder Coating Prices

All prices include masking all threads, stripping, cleaning, degreasing, and coating parts.

There is a 50% additional charge for colors such as clear coats and translucent/anodized/candy colors due to being a 2-step coating process. These colors all have a * next to it on the color chart. Please give us a call or email us if you are unsure.

*Requires use of High Temp coating such as our Ceramic Coating that withstands up to 2000 degrees.

Cast aluminum and magnesium parts may experience out-gassing and or bubbling in the finished powder coating. Bonehead Performance will take every precaution to avoid out-gassing, however Bonehead Performance cannot be held responsible for bubbling caused by porous coatings.

Each piece must be disassembled or additional charges will apply.

If you do not see a part listed that you would like to have powder coated, contact us.

All prices below are estimates only. Prices are subject to change upon inspection. The price minimum for any job is $50. Also, we no longer service chrome plated wheels.

Part DescriptionPrice starting at:
Air cleaner front$30.00 to $40.00
Air Cleaner back$20.00 to $30.00
A-arm$35.00 to $45.00 Each
Battery Base$25.00 to $35.00
Battery Box$30.00 to $40.00
Battery Top Plate$20.00 to $30.00
Bolts (taped threads)$2.50 each
Brackets Small$5.00 to $7.50 Each
Brackets Medium$10.00 to $12.50 Each
Brackets Large$15.00 to $20.00 Each
Brake Caliper$30.00-$40.00 Each
Brake Levers$10.00-$15.00 Each
Brake Pedal$20.00 to $25.00
Brake Rotor (center & edges)$50.00-$60.00 Each
Chain Guard$25.00 to $30.00 Each
Cam Cover$25.00 to 35.00
Coil Bracket$15.00 to $20.00
Control Arm$35.00 to $45.00
Cylinder Head$75.00 to $100.00 each
Derby Cover$20.00-$30.00
*Exhaust ShieldPlease See Ceramic Coating Section
*Exhaust PipePlease See Ceramic Coating Section
*Exhaust MufflerPlease See Ceramic Coating Section
Fender$80.00-$125.00 (depending on size)
Foot Pegs$5.00 to $10.00 each
Frame ATV (4-wheeler)$275.00 to $325.00 (Banshee add $50.00)
Frame Harley$325.00-$375.00
Frame Sport Bike$300.00-$350.00
Frame Swing Arm$75.00-$125.00
Forks (Lower)$35 each
Fuel / Gas Tank$125.00-$175.00
Handle Bars Small$40 to $50.00
Handle Bars Large$50.00 to $60.00
Handle bar clamp/risers$20.00 to $25.00
Handle Bar switch Housing$20.00 to $25.00
Headlight Bucket$25.00 to $30.00
Headlight Ring$15.00 to $20.00
Horn Cover$10.00 to $20.00
Hubs$40.00-$60.00 each
Inspection cover$15.00 to $20.00
Kick Stand$10.00 to $15.00
Master Cylinder$25.00 to $30.00
Master Cylinder Cover$10.00 to $15.00
*MufflerPlease See Ceramic Coating Section
Oil Pump Cover$15.00 to $20.00
Oil Pump Housing$40.00 to $45.00
Primary Cover$65.00 to $75.00
Pushrod Tubes (all 4)$30.00 to $40.00
Rocker Boxes$25.00-$45.00 each
Sissy Bar$40.00-$60.00
Skid Plate$20.00-$40.00
Springs$25.00 to $30.00
Sprocket$45.00-$65.00
Sprocket cover$20.00 to $25.00
Strut Covers$15.00 to $20.00 each
Swing Arm$75.00-$125.00
Switch Housing$20.00 to $25.00
Triple Trees$30.00 to $35.00 each
Visor Cover$15.00 to $20.00
Washers$1.50 each
FOR ALL WHEELS BELOW: Add an anti-corrosive primer treatment as a base coat for $25 per wheel. Add a clear top coat for extra protection for $25 per wheel.
***NOTE: We will no longer be servicing chrome plated wheels.***
Wheels- 26"+$145.00 Each
25"$140.00 Each
24"$135.00 Each
23"$130.00 Each
22"$125.00 Each
21"$120.00 Each
20"$115.00 Each
19"$110.00 Each
18"$105.00 Each
17"$100.00 Each
16"$95.00 Each
15"$90.00 Each
14"$85.00 Each
13"$80.00 Each
Less than 13" $75.00 each
FOR ALL WHEELS ABOVE: Add an anti-corrosive primer treatment as a base coat for $25 per wheel. Add a clear top coat for extra protection for $25 per wheel. We no longer service chrome plated wheels.
NOTE: There is a $50 minimum per order & $25 minimum per color change.

Powder Coating Specialists for Commercial, Industrial, Home Decor, Furniture, Automotive, Motorcycles and Much More!